Coursecode:
mt083p
Coursename: Production exercise
DUT
creditpoints: 1
ECTS creditpoints: 2 |
| Subfaculty of
Mechanical Engineering and Marine Technology |
| Lecturer(s): Drooger, J.C., Hengst, prof.ir. S., Wouters, ing. R.L.C. |
Tel.: 015-2782700/5306/6603 |
Catalog data:
CAD, NUPAS, xEagle, macros, shell expansion, section plan, passage time (production
planning) |
Courseyear: 2
Semester: x/0/0/x
Hours p/w: -
Other hours: 40 hours
Assessment: See remarks
Assessm.period(s): -
(see academic calendar) |
| Prerequisites: mt700, mt710, mt800 |
| Follow up: mt710, mt711 |
| Detailed description of topics:P.1: Instruction for drawing of the ship construction using NUPAS ( a CAD/CAM/CAE
software package based upon the xEagle drawing program). Making a set up of the midship
section plan, and plotting. Exercises using the macro language of xEagle. Compulsory
excursion to a yard with a lecture on the aspects of implementation of CAD/CAM/CAE in
practice.
P.2: Making a shell expansion based upon the linesplan as made for mt085P D2. Set up of
a sections plan, using the production parameters of a yard and the scantlings as
determined in exercise mt082P. Finally a passage time, required capacity plus area and
other production related aspects have to be worked out.
|
| Course material:
Course material:19~ P.1: Production exercise - Introduction to CAD (2d) - mt083P1 - J.C.
Drooger, ir. J.H. Vink, ing. R.L.C. Wouters
P.2: Production exercise - Yard practice - mt083P2 - J.C. Drooger, prof.ir. S. Hengst
|
| References from
literature: - |
| Remarks (specific information
about assesment, entry requirements, etc.): P.1:
- Examination:The credits as based upon the results of the exercise has to be 6 or
higher
- Admission: -
- Application at start of the 1st quintal with mr Wouters.
- Location: SUN room, block II, 2nd floor
P.2:
- Examination: The credits obtained has to be 6 or higher.
- Admission: the exercise is open for students that have succesfully finished mt700 and
mt800 and also followed the courses of mt710, while the relevant parts of the exercises
mt081P (linesplan) and mt082P (report midship section) have to be finished.
- Application: registrationforms will be present on the announcement board at start of the
5th quintal.
- Location: small drawing room of MT
|
Goals:
- P.1: Introduction to a dedicated maritime CAD/CAM/CAE software
- P.2: To get Insight into the production process of a ship at a yard
|
Computer use:
- P.1: Usage of CAD program at SUN workstations
- P.2: -
|
| Laboratory
project(s): exercise |
| Design content: - |
| Percentage of
design: 75% |